Product Description
- 12,000–20,000 lb GTW — Capacity varies by receiver size: 12,000 lb for 2″, 16,000 lb for 2½″, 20,000 lb for 3″; tongue weight is 10% of GTW
- XR Hitch + Friction Sway Control — Adjustable ball mount hitch paired with one or two friction sway arms to keep the trailer tracking straight
- Black Combo Ball Mount with Sway Tabs — One-piece welded mount with 2″ (10,000 lb) and 2-5/16″ (20,000 lb) balls and welded sway control tabs on both sides
- 8 or 10 Adjustment Holes — 8″ or 10″ of total height adjustment; 4″ rise to 4″ drop or 5½″ rise to 5½″ drop depending on hitch selected; flip frame for more drop or rise
- 1 or 2 Sway Kits Included — Use one friction sway arm for trailers up to 10,000 lb or 24′; use two for trailers over 10,000 lb or longer than 24′
- Adjustable Friction Bar — Fine-tune sway resistance to match your trailer and road conditions
- 2-Hole Receiver Shank — Available in 2″, 2½″, and 3″ receiver sizes; dual pin holes for length adjustability and mud flap compatibility
- Kit Includes — Shocker XR hitch, black combo ball mount with sway tabs, 2″ & 2-5/16″ hitch balls, 1 or 2 friction sway arm assemblies, 1¼″ mini balls, hardware, and 2 ball mount pins with clips
- 10+ Ball Mount Options: We have dual ball, drop, raised, pintle hooks, pintle & ball, combo multi-ball, clevis pin, dual ball with sway bar tabs, cushioned drawbar, drawbar and more (Sold Separately).
- Safety Notice: Towing capacity is limited by lowest rated component. Manufactured by Shocker Hitch® USA in Jamestown, ND.
- What Size Receiver Hitch Do I Need? Not sure if you have a 2″, 2-1/2″ or 3″ receiver tube? Measure inside to inside. Check out our guide on How to measure receiver your hitch tube size.
- How Much Drop or Rise Do I Need? Check out our guide to find out how much drop or rise you need.
The Shocker XR Sway Control Towing Kit pairs the adjustable XR series hitch with a black combo ball mount and one or two friction sway control arms — giving you height adjustability and trailer sway management in a single package. Rated up to 20,000 lb GTW / 2,000 lb TW depending on receiver size, it’s built for towing campers, enclosed trailers, travel trailers, toy haulers, and race trailers where sway from wind, passing vehicles, or rough roads is a concern.
The one-piece welded black combo ball mount includes both a 2″ (10,000 lb) and 2-5/16″ (20,000 lb) hitch ball with welded sway control tabs on both sides. The XR hitch frame offers 8″ or 10″ of total height adjustment — 4″ rise to 4″ drop or 5½″ rise to 5½″ drop depending on the hitch selected — and flips around for additional drop or rise. Two pin holes on the shank allow for length adjustment and compatibility with hitch-mounted mud flaps. The friction sway arms connect from the sway tabs to the front of the trailer, stiffening the connection and keeping it in line with the tow vehicle. Use one arm for trailers up to 10,000 lb or 24′; use two for trailers over 10,000 lb or longer than 24′.
Each friction sway arm kit includes the sway arm assembly, one 1¼″ trailer-mounted mini ball, one 1¼″ hitch-mounted ball with lock washer and nut, four metal lag screws, and two retaining clips. Available in 2″, 2½″, and 3″ receiver sizes.
Compatible with pickup trucks, motorhomes, RVs, vans, SUVs, CUVs, and minivans. Not compatible with weight-distribution hitch systems.
Manufactured by Shocker Hitch® USA in Jamestown, ND.
Reviews