Product Description
- Sway Bar Raised Ball Design with 2″ or 2-5/16″ Hitch Ball: Features two sway bar mounting tabs along with either 2″ or 2-5/16″ trailer hitch ball. 2-5/16″ hitch ball has a 20,000 lbs GTW & 2,000 lbs tongue weight. 2″ ball has a 10,000 lbs GTW & 1,000 lbs tongue weight.
- Designed For Use with 1 or 2 Friction Sway Arm Bar Kits: Two integrated sway bar mounting tabs with center hole for mounting the 1-1/4″ mini hitch ball from a friction sway control arm bar kit, such as the Shocker sway bar kit, part # SH-1001 or similar, which is not included and sold separately.
- Raised Ball with Sway Mount Design: Raised ball mount attachment is often used when towing bumper pull camper trailers with higher tongue & ball coupler or with tow vehicles lower to the ground such as 2 wheel drive pickups, vans & suv’s when way is an issue.
- Rise & Drop Range Depending on Shocker Receiver Hitch Used With: 8 hole Air Receiver Hitches are 2″ of rise to 2″ of drop. Super Drop is 2″ of rise to 6″ of drop. Trail Force is 2″ of rise to 4-1/2″ of drop. Impact series hitch is 5″ of rise to 3″ drop. 8 hole XR hitch is 5″ of rise to to 3″ of drop. 10 hole XR hitch is 7″ of rise to 5″ of drop.
- Fits Shocker Receiver Hitches: Works with Shocker Air, HD, Streamline, Super Drop, Trail Force, Sport, Impact & XR series hitches. Fits a 3-3/4″ ID wide Shocker receiver hitch channel.
- 2 Trailer Hitch Ball Size Choices: Choose mount with a 2″, 2-5/16″ chrome trailer hitch ball or with no hitch ball.
- 3-5/8″ OD Ball Mount Attachment Width: 3-5/8″ wide OD to fit a 3-3/4″ hitch ID channel with a 3″ on center hole pattern for two 5/8″ pins. Made to fit Shocker bumper hitches.
- Raised Sway Mount Attachment Features a 2 Pin Design: Shocker raised ball mounts are designed with a 2 pin hole design for adjustability, maximum strength & durability.
- Safety Notice: Towing capacity limited by lowest rated component. Manufactured by Shocker Hitch® USA in Jamestown, ND.
California Resident: Prop 65 Warning
The sway control Shocker Hitch® raised ball mount attachment with two sway bar mounting tabs featuring either a chrome 2″ or 2-5/16″ hitch ball for maximum versatility. Designed to work with Shocker receiver hitches & friction sway arm bar kits. Each sway bar mount tab has a center hole for mounting a 1-1/4″ ball from a sway arm bar kit. The Shocker sway arm bar kit, part # SH-1001 is available and sold separately. 2-5/16″ hitch ball has a 20,000 lbs GTW & 2,000 lbs tongue weight. The 2″ ball has a 10,000 lbs GTW & 1,000 lbs tongue weight. This sway style raised ball mount attachment features a 1-1/4″ hole center hole for the hitch ball to mount through. Built for heavy duty bumper pull trailer towing. Ideal if you have a lower vehicle or a trailer with a higher tongue or ball coupler. Compatible with Shocker Receiver Hitches. Works with Shocker Air, Streamline, Trail Force, Sport, Super Drop & HD series air receiver hitches & Shocker XR series receiver hitches, & Impact series cushion receiver hitches. Fits a 3-3/4″ ID wide Shocker receiver hitch channel. The drop and rise range varies by the Shocker Receiver Hitch this sway bar raised ball mount attachment is used with. Made by Shocker Hitch® USA, Jamestown, ND.
Note: The sway control tab mount is designed to work with up to two, part # SH-1001, Shocker friction sway bar kits or similar, which is not included and are available separately. It is suggested to get (1) kit if towing under 10,000 lbs and (2) kits if towing over 10,000 lbs.
California Resident: Prop 65 Warning
I bought the Shocker air ride hitch and loved the improvement in the ride. There was one problem. I wasn’t able to tow level. Was running with a two to three inch low tongue. Thanks for coming out with the raised ball it allows me to tow level.