Product Description
- 14,000 lb GTW / 1,400 lb TW — Heavy-duty cushion hitch capacity for serious bumper pull towing
- Built-in Dual Rubber Bump Cushions — Absorbs road shock, bumps, bangs, jerks, and tugs for a smoother towing experience
- Flip-Around Design — Flip the entire hitch for additional drop or rise depending on your setup
- 8″ of Total Adjustment — Rise and drop range varies by mount selected
- 10+ Ball Mount Options — Combo ball, drop, raised, pintle, pintle & ball, drawbar, cushioned drawbar, clevis, sway tab mounts & more
- Combo Ball Ratings — 2-5/16″ ball at 20,000 lbs | 2″ ball at 10,000 lbs
- 2-Hole Receiver Shank — Fits 2″ & 2½″ receiver tubes; extra length accommodates hitch-mounted tow flaps
- Reduces Trailer Sway — Pivoting cushion design helps minimize sway tendency during towing
- Safety Red Powder Coat Finish — Impact-resistant textured finish on base frame; matte black on most mounts
- Wide Vehicle Compatibility — Works great on pickup trucks, vans, SUVs, CUVs, minivans, RVs, and motorhomes
- Complete Kit Includes — Impact cushion base frame, combo dual ball mount with 2″ & 2-5/16″ balls, and two D-handle hitch pins with clips
- How Much Drop or Rise Do I Need?
- Made in Jamestown, ND by Shocker Hitch® USA — Exclusive Canadian availability through shockerhitches.ca
The Shocker 14K Impact Cushion Receiver Hitch gives your pickup, van, SUV, or motorhome a smoother, safer bumper pull towing experience without the need for air pressure or complex components. This heavy-duty 14,000 lb GTW cushion hitch replaces the punishment of a solid ball mount with a dual bump cushion suspension system that absorbs the bangs, bumps, and jerks out of towing — and helps reduce trailer sway in the process.
The built-in dual bump cushions and pivoting design do the work on rough roads, concrete highways, and everything in between. A unique flip-around design lets you run the hitch in either orientation for more drop or rise without additional hardware, and 8″ of total adjustment gives you further fine-tuning on top of that. Two hitch pin holes on the receiver shank allow for length adjustment and leave room to mount hitch-mounted mud flaps or Shocker bumper tow flaps.
Build your own setup by selecting your receiver size (fits 2″ and 2½″ tubes) and choosing from over 10 ball mount attachments — combo ball, drop, raised, pintle hook, drawbar, clevis, cushioned drawbar, and sway tab variations. Popular with contractors, boat owners, ATV and UTV haulers, race trailer operators, and RV owners across Canada.
Fits full-size and mid-size pickup trucks, vans, SUVs, CUVs, and motorhomes with a standard under-bumper receiver. Not compatible with weight-distribution hitch systems. Manufactured by Shocker Hitch® USA in Jamestown, ND.
This hitch is heavy & solid in its construction. It makes towing a weighty trailer comfortable and gives you the “it’s not behind you” feeling. When we tried towing our boat with pressure brakes the “clunk” feeling we usually had from the stop and go was gone. Worth it